Table 3-10. Initial Values Of Objects In The Snmp Agent's Mib; Table 3-11. Snmp Agent Private Mib Objects That Describe The Snmp Operations Environment - HP T9576G06 Management Manual

MIBs Supported by the SNMP Agent

Table 3-10. Initial Values of Objects in the SNMP Agent's MIB

MIB Object
System group objects:
sysDescr
sysObjectID
sysContact
sysName
sysLocation
sysServices
SNMP group object:
snmpEnableAuthenTraps
Table 3-11 gives the SNMP agent's private MIB objects that describe the SNMP
operations environment.
Table 3-11. SNMP Agent Private MIB Objects That Describe the SNMP
Operations Environment (page 1 of 4)
SNMP Agent Private
MIB Object
zagInEndpointTable
zagInEndpointEntry
zagInEpRowStatus
Initial Value
NonStop Kernel System
Version: Dxx
Node: node-name
Agent: agent-process-name
where Dxx is the product version of the SNMP agent; for
example, D23.
1.3.6.1.4.1.169.3.155.1
"unknown"
A name associated with the default TCP/IP process handling
communication between the SNMP agent and SNMP
managers. It is derived by a gethostname socket call against
the TCP/IP process specified in the
TCPIP^PROCESS^NAME startup parameter or, if none is
specified, against $ZTC0 on the local node.
"unknown"
79
1 (yes)
What the Object Defines and Its
Default Value
Contains all of the TCP/IP
request/response connection point
definitions.
Each row in the zagInEndpointTable
represents one request/response
connection definition.
The value of this object is the means
by which request/response connection
definitions are created and removed,
and also the means by which their
availability for use by the SNMP agent
is controlled.
SNMP Configuration and Management Manual—424777-006
3- 32
Authentication Table Entries
Equivalent SCF
Construct
All of the ENDPOINT
objects currently
defined.
ENDPOINT object.
See Table 3-4 on
page 3-20.