Scf Commands For Managing A Subsystem - HP T9576G06 Management Manual

Introduction to SCF for the SNMP Agent
Examples of other SCF commands that pertain only to the current SCF session:
The SYSTEM and VOLUME commands identify the default system, volume, and
subvolume names used for expanding file names.
The OBEY and OUT commands identify the files used for command input and
display output.
The ASSUME command defines a default object to be used when the object is
omitted from an SCF command.
The ENV command displays the current settings of the SCF command parameters
that establish the program environment.
SCF commands that pertain only to the SCF session appear in the SCF Reference
Manual for G-Series Releases.

SCF Commands for Managing a Subsystem

To issue a command to manage components of a subsystem, follow the command with
an object type and an object name. For example, the following STATUS command
displays the state of the NonStop agent TRAPDEST object named $ZSNMP.#TRAP:
-> STATUS TRAPDEST $ZSNMP.#TRAP
SNMP Status TRAPDEST
Name
$ZSNMP.#TRAP
Note. You do not explicitly indicate SCF the subsystem with which you are communicating.
SCF determines the subsystem by interpreting the object type and object name you supply in
the command line.
When including command modifiers (options that affect the scope of the command) or
object attributes (to define characteristics of an object), separate each keyword-value
pair from the object name with a comma. For example:
-> INFO PROCESS $ZSNMP, SUB All, DETAIL
-> ADD TRAPDEST $ZSNMP.#TRAP, HOSTADDR "130.252.85.199"
Examples of other SCF commands used to manage subsystem objects:
The ADD and DELETE commands, which add and delete object configurations to
and from the SCF sphere of control for a particular subsystem.
The START, STOP, and ABORT commands, which cause a configured object to
become active or inactive; and the ALTER command, which changes the
configuration of an object.
The INFO command, which displays the current configuration values for an object.
The STATUS command, which displays the current operational state of an object.
State
STARTED
SNMP Configuration and Management Manual—424777-006
SCF Commands for Managing a Subsystem
4- 22