HP T9576G06 Management Manual page 635

IPX/SPX Subagent (G-Series)
ZISA-VAL-CR-reason
is the change reason, which is one of the following values:
Token Value
ZISA-VAL-CR-PROCESS-SIGILL
ZISA-VAL-CR-PROCESS-SIGABRT
ZISA-VAL-CR-PROCESS-SIGFPE
ZISA-VAL-CR-PROCESS-SIGSEGV
ZISA-VAL-CR-PROCESS-SIGSTK
ZISA-VAL-CR-PROCESS-SIGTIMEOUT
ZISA-VAL-CR-PROCESS-SIGTERM
ZISA-VAL-CR-PROCESS-SIGNOMEM
Cause. The subagent process trapped.
Effect. The subagent process stops.
Recovery. If the trap occurred in the primary process, any existing backup process
takes over, so no recovery is needed. If a backup process was not running, try
restarting the subagent. Regardless of whether the subagent is able to recover,
contact your service provider and provide all relevant information as follows:
Descriptions of the problem and accompanying symptoms
Details from the message or messages generated
Supporting documentation such as EMS logs
If your local operating procedures require contacting the GCSC, supply your system
number and the numbers and versions of all related products as well.
Sample Message
96-01-30 16:50:50 \COMM.$ZISA TANDEM.IPXSA.D30 001012 Transient Fault
IPX/SPX-SNMP-subagent-process - \COMM.$ZISA,
event number:process-trapped,
fault type: Internal-error, user content:
undefined
SNMP Configuration and Management Manual—424777-006
1012: ZISA-EVT-PROCESS-TRAPPED
DDL AS Clause
"Instruction-failure"
"Process-aborted"
"Arithmetic-overflow"
"Illegal-address-reference"
"Stack-overflow"
"Loop-timer-timeout"
"Termination-request"
"Memory-space-exhausted"
13-73