Status Command; Stop Command - HP T9576G06 Management Manual

SCF Command Syntax Summary for the NonStop
Agent

STATUS Command

The STATUS command displays the operational states of objects in a NonStop agent
configuration. This is a nonsensitive command.
ENDPOINT Object
STATUS ENDPOINT [$agent-process.]#endpoint-name
PROCESS Object
STATUS PROCESS $agent-process [ , SUB [ NONE | ALL | ONLY ] ]
PROFILE Object
STATUS PROFILE [$agent-process.]#profile-name
TRAPDEST Object
STATUS TRAPDEST [$agent-process.]#trapdest-name

STOP Command

The STOP command causes an object to become inactive. The object is not available
for use by the NonStop agent until it is restarted. This is a sensitive command.
ENDPOINT Object
STOP ENDPOINT [$agent-process.]#endpoint-name
PROFILE Object
STOP PROFILE [$agent-process.]#profile-name
TRAPDEST Object
STOP TRAPDEST [$agent-process.]#trapdest-name
SNMP Configuration and Management Manual—424777-006
A- 5
STATUS Command