NonStop NET/MASTER Trap Subagent
Table 10-1. Objects in the EMS Trap MIB (page 4 of 4)
Object and Attributes
trapCritical
1.3.6.1.4.1.169.3.12.7
not-accessible
DisplayString (SIZE
(1..14))
trapText
1.3.6.1.4.1.169.3.12.8
not-accessible
DisplayString (SIZE
(1..1000))
Messages
GENTRAP sends messages to an Operator Control Services (OCS) window when the
openagent, sendtrap, or close agent functions fail.
openagent Failures
Table 10-2
describes the actions GENTRAP takes when openagent fails.
Table 10-2. openagent Return Codes and GENTRAP Actions
Return Code
0
1
2
The format of the message is as follows:
error return-code from openagent call.
&sys.file.rc = &sys.file.rc-value
&sys.file.error = &sys.file.error-value
&sysmsg = &sysmsg-value
Definition
An indication of
whether the event is
critical or noncritical.
Critical events have
consequences that
might be severe, as
when they indicate
potential or actual loss
of data, loss of a major
subsystem function,
loss of fault-tolerance
capability, or loss of
subsystem integrity.
Text describing the
event.
Meaning
The function completed
successfully.
A UDB problem occurred.
Communication with the
agent process could not
be started.
SNMP Configuration and Management Manual—424777-006
Format of Value
One of these enumerated
values:
CRITICAL
not critical
ASCII text.
GENTRAP Actions
Processing continues.
Processing stops after a message is displayed
at an OCS window.
Processing stops after a message is displayed
at an OCS window.
10 -18
Messages
Derivation of Value
ZEMS-TKN-
EMPHASIS token
value. If the value of
this token is false (0),
the value passed is
(not critical). If the
value is non-zero, the
value passed is
(CRITICAL).
EMSTEXT procedure
call.