Dependencies; Installation Steps - HP T9576G06 Management Manual

IPX/SPX Subagent (G-Series)

Dependencies

The following products must be configured and running for the subagent to operate
properly:
SNMP agent (D22 or later)
EMS (D21 or later)
A G02 or later version of the NonStop IPX/SPX product and the underlying SLSA
resources upon which it relies.
An SNMP manager that can send requests to a SNMP agent process

Installation Steps

The subagent is automatically installed when you install NonStop IPX/SPX.
Ensure that the EMS file named ZISATMPL is installed in the system template file.
When you use the SYSGEN utility to generate your system, this file is automatically
installed in the system template file; otherwise, you must manually install it. Refer to
the DSM Template Services Manual for more information.
Load the subagent's ASN.1 MIB definition files for any manager from which subagent
requests will be sent. The MIB definitions are contained in three files:
Two files contain Novell MIB definitions. If Novell definitions are already
represented in a manager's MIB view, do not install either of the files. Otherwise,
install IPXMIB on managers that will be communicating with SNMP agents
provided by various vendors or IPXMIBA on managers that will be communicating
only with SNMP agents.
IPXMIB contains definitions identical to those written by Novell.
IPXMIBA contains the same definitions as IPXMIB, with several exceptions.
DESCRIPTION clauses have been modified to provide information specific to
HP systems. In addition, ipxBasicSysExistState is a read-only object, not a
read-write object, and ipxBasicSysName has a syntax of DisplayString, not
OCTET STRING.
TDMNWMIB defines the objects defined by HP.
Configure the SNMP agent to support communications with any managers that you
want to interact with the IPX/SPX Subagent, as described in
Configuring the SNMP Agent.
SNMP Configuration and Management Manual—424777-006
13-11
Dependencies
Section 2, Installing and