Default Values For Table Row Objects; Activating Table Row Entries; Table 3-8. Endpoint And Trapdest Default Values; Table 3-9. Rowstatus Values With Defined And Undefined Row Objects - HP T9576G06 Management Manual

MIBs Supported by the SNMP Agent

Default Values for Table Row Objects

Table 3-8 lists the default values for zagInEndpointTable and zagInTrapdestTable row
objects.

Table 3-8. ENDPOINT and TRAPDEST Default Values

Table Row Object
Attribute
NAME
1
STATE
HostAddr
Network
Community
Access
Type
Port
RowStatus
1
For row creation only. For other operations, there is no default value.
Table 3-9 identifies the final values for zagInEpRowStatus, zagInTdRowStatus, and
zagInPfRowStatus if you initially set them to createAndGo or createAndWait when:
All row objects are defined.
Some row objects are undefined.

Table 3-9. RowStatus Values With Defined and Undefined Row Objects

RowStatus Value
createAndGo (4)
createAndWait (5)

Activating Table Row Entries

You can activate an entry when it has one of the following RowStatus values:
notInService (2). Set the value of the RowStatus object to active (1).
notReady (3). Provide a value for any table row objects that have none and then
set the value of the RowStatus object to active (1).
zagInEndpointTable
Default Value
none; a name must be
supplied by an
authorized SNMP
management
application.
DEFINED
0.0.0.0
$ZTC0
N/A
N/A
N/A
N/A
See Table 3-9.
All Row Objects Defined
active (1)
notInService (2)
SNMP Configuration and Management Manual—424777-006
Default Values for Table Row Objects
zagInTrapdestTable
Default Value
none; a name must
be supplied by an
authorized SNMP
management
application.
DEFINED
none provided
$ZTC0
Tandem
N/A
BROADCAST
162
See Table 3-9.
Some Row Objects Undefined
Operation rejected
notReady (3)
3- 29
zagInProfileTable
Default Value
none; a name must
be supplied by an
authorized SNMP
management
application.
DEFINED
0.0.0.0
N/A
public
READ-ONLY
N/A
N/A
See Table 3-9.