Table 8-3. Private (Ztsa) Mib Objects Supported By The Tcp/Ip Subagent - HP T9576G06 Management Manual

TCP/IP Subagent
Table 8-3. Private (ZTSA) MIB Objects Supported by the TCP/IP
Subagent (page 2 of 7)
Object and Attributes
ztsaProcessUserID
1.3.6.1.4.1.169.3.202.8
read-only
INTEGER (0..255)
ztsaPrimaryCPU
1.3.6.1.4.1.169.3.202.9
read-only
INTEGER (0..255)
ztsaPrimaryPIN
1.3.6.1.4.1.169.3.202.10
read-only
INTEGER (0..255)
ztsaBackupCPU
1.3.6.1.4.1.169.3.202.11
read-write
INTEGER (0..255)
ztsaBackupPIN
1.3.6.1.4.1.169.3.202.12
read-only
INTEGER (0..255)
* See State Object/Resource Object Pairs
control or indicate the internal processing state of processes used by the subagent.
Definition
The user ID number of
the user who started the
TCP/IP Subagent.
The number of the
processor in which the
primary TCP/IP
Subagent process is
running.
The process
identification number
(PIN) of the primary
TCP/IP Subagent
process.
The number of the
processor in which the
backup process will start
or is running.
The process
identification number
(PIN) of the backup
TCP/IP Subagent
process.
on page 8-28 for information about TCP/IP Subagent objects that
SNMP Configuration and Management Manual—424777-006
Format and Derivation of Value
user-ID-number returned by a
Guardian PROCESS_GETINFO
procedure call.
cpu-number returned by a
Guardian
PROCESS_GETPAIRINFO
procedure call.
PIN-number returned by a
Guardian
PROCESS_GETPAIRINFO
procedure call.
cpu-number specified for the -b
startup parameter. After startup,
the value can be set by an SNMP
manager.
A value of -1 indicates the
backup is not configured.
Setting this object is permitted
only if ztsaBackupState* is set to
disabled (3). Once
ztsaBackupCPU has been set to a
new value, ztsaBackupState must
be set to enabled (4) for the new
value to take effect.
PIN-number returned by a
Guardian
PROCESS_GETPAIRINFO
procedure call.
A value of -1 indicates that the
backup is not running.
8- 22
ZTSA MIB Objects