HP t5300 - Thin Client Getting Started Manual
Imaging tool
Hide thumbs
Also See for t5300 - Thin Client:
- Manual (12 pages) ,
- Safety and regulatory information manual (12 pages) ,
- Instructions manual (6 pages)
Table of Contents
Advertisement
Quick Links
HP Compaq Thin Client Imaging Tool
Abstract . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Creating an ISO image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Formatting a USB flash device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Unpacking the image and tools for deployment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Deploying with PXE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Deployment Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Appendix B: Configuring a PXE server under Microsoft RIS . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing Remote Installation Services (RIS PXE Server) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Authorizing Remote Installation Services (RIS PXE server) . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Configuring Remote Installation Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Set User Permissions on the Active Directory Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
RIS Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Creating network bootable disk to map drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Appendix C: Changing boot order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
For more information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HP t5300 - Thin Client
Summary of Contents for HP t5300 - Thin Client
-
Page 1: Table Of Contents
HP Compaq Thin Client Imaging Tool Abstract ............. . . 2 Introduction . -
Page 2: Abstract
Abstract This white paper provides an overview of the HP Compaq Thin Client Imaging Tool for the HP Compaq Thin Client t5000 Series and instructions for obtaining and deploying the restore image. Introduction The HP Compaq Thin Client Imaging Tool is part of the Package-for-the-Web deliverable that contains the original factory image for the HP Compaq t5000 Series Thin Client. -
Page 3: Getting Started
Getting started There are three deployment options supported by the imaging tool. You can choose to do one or more of the following: • Generate an ISO image to use with CD creation software to create a bootable CD for deployment using a USB CD ROM drive. -
Page 4: Creating An Iso Image
Creating an ISO image Click ISO Image. When prompted, enter a file name for the generated ISO file. Once this process is complete, use the generated ISO file to create a bootable restore CD with your CD creation software. Connect a USB CD-ROM drive to the thin client. You can only attach one bootable USB device to the thin client during this process. -
Page 5: Formatting A Usb Flash Device
Formatting a USB flash device Connect your USB flash device (drive key). Ensure that only one USB flash device is connected to the system. Click USB Format. Select the USB drive from the list, using the up and down arrows to display the correct drive letter. If the USB drive is not in the list, click Update Drives, then scroll through the list again. -
Page 6: Unpacking The Image And Tools For Deployment
Unpacking the image and tools for deployment Click Deployment. When prompted, select the destination directory for the imaging tools and image. The components that comprise DSKIMG.BIN are unpacked to the specified directory. This process places three new files in the specified folder: •... -
Page 7: Deploying With Pxe
Deploying with PXE Ensure that IBR.exe and Flash.img are stored in the same directory on the server. Add [ full path ]\IBR.exe -y [ full path] \Flash.img hd0 to the PXE command file. Run the PXE command file. To view the IBR command line options: At the command prompt, type IBR.EXE /? and press Enter. -
Page 8: Appendix B: Configuring A Pxe Server Under Microsoft Ris
Appendix B: Configuring a PXE server under Microsoft RIS HP Compaq t5000 Thin Client Series products that use Microsoft Windows XPe and Microsoft Windows CE .NET support PXE (Pre-boot Execution Environment). PXE allows a client to boot from a server on a net- work prior to booting the embedded operating system (OS) from the local Flash module. -
Page 9: Authorizing Remote Installation Services (Ris Pxe Server)
Authorizing Remote Installation Services (RIS PXE server) If you installed RIS on a server other than the server running DHCP, authorize PXE with DHCP as follows: Record the IP address of the RIS PXE server. Log on to the DHCP Server as Administrator. From the Control Panel, select Administrative Tools. -
Page 10: Set User Permissions On The Active Directory Server
Set User Permissions on the Active Directory Server On the active directory server: Select Start > Programs > Administrative Tools. Click Active Directory Users and Computers. Right-click on the appropriate domain name. Click Delegate Control. Click Next. Click Add to add users. Highlight Everyone and click Add. -
Page 11: Appendix C: Changing Boot Order
Appendix C: Changing boot order The default boot order is a BIOS configuration setting you can change to always attempt to PXE boot first. The HP Compaq Thin Client Boot Order Change Tool enables you to remotely change the boot order of a thin client. -
Page 12: For More Information
Altiris Deployment Solution Documentation: http://www.altiris.com/support/documentation/ © Copyright 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Need help?
Do you have a question about the t5300 - Thin Client and is the answer not in the manual?
Questions and answers