HP T9576G06 Management Manual page 121

MIBs Supported by the SNMP Agent
Table 3-3. zagInternal Group Objects Supported by SNMP Agent (page 8 of 8)
Object and Attributes
zagInTdState
1.3.6.1.4.1.169.3.155.1.7.4.2.1.3
read-only
INTEGER
zagInTdHostAddr
1.3.6.1.4.1.169.3.155.1.7.4.2.1.4
read-write
DisplayString
zagInTdCommunity
1.3.6.1.4.1.169.3.155.1.7.4.2.1.5
read-write
DisplayString (SIZE (0..50))
zagInTdNetwork
1.3.6.1.4.1.169.3.155.1.7.4.2.1.6
read-write
DisplayString
zagInTdType
1.3.6.1.4.1.169.3.155.1.7.4.2.1.7
read-write
INTEGER (1..2)
zagInTdPort
1.3.6.1.4.1.169.3.155.1.7.4.2.1.8
read-write
INTEGER
Definition
The current operational
state of the trap
destination.
The address of the host
which is to receive trap
messages.
The name that the
SNMP agent returns in
traps sent to the trap
destination.
The name of the TCP/IP
process that the agent
uses to send traps.
Broadcast trap
destinations are sent all
trap messages except
directed ones. Directed
trap destinations receive
only directed traps.
An entry containing the
value of the trap port.
SNMP Configuration and Management Manual—424777-006
3- 19
MIB Objects
Format and Derivation of
Value
One of these four numeric
state values, which can only
be read:
DEFINED (1)
STARTED (3)
STARTING (4)
STOPPED (5)
Default value is DEFINED.
Set by the SNMP agent.
Format of #.#.#.#.
No default value is
provided. Can be set by an
authorized SNMP manager
or through SCF.
Display string with a default
value of "Tandem." Can be
set by an SNMP manager
or from SCF.
$TCP/IP process name
The default value is
"$ZTC0." Can be set by an
authorized SNMP manager,
assigned from SCF, or set
by the run startup
parameter
TCPIP^PROCESS^NAME.
One of these two integer
values is permitted:
Broadcast (1) signifies
nondirected traps.
Directed (2) signifies
directed traps.
The default value is
Broadcast (1). Can only
be set by an authorized
SNMP manager.
The default value is 162.
The SNMP agent is not
enhanced to configure the
trap port through SCF. You
cannot view the port value
using SCF.