HP T9576G06 Management Manual page 631

IPX/SPX Subagent (G-Series)
ZISA-VAL-CHRSN-reason
is the change reason. One of the following DDL AS clauses is inserted in the
message text following "cause:":
Token Value
ZISA-VAL-CHRSN-OPERATOR-RQST
ZISA-VAL-CHRSN-INVALID-PROC
ZISA-VAL-CHRSN-INCORR-PROC
ZISA-VAL-CHRSN-RESOURCE-PROB
ZISA-VAL-STATE-CONNECTED
is the previous state. The DDL AS clause of this value ("connected") appears in
the message text following "previous state:".
ZISA-VAL-STATE-DISCONNECTED
is the current state. The DDL AS clause of this value ("disconnected") appears in
the message text following "current state:".
ZEMS-TKN-CONTENT-USER
is assigned the value "undefined" in the message text following "user content:".
ZISA-VAL-DISCONNECTED
is the value assigned to the ZISA-TKN-OBJ-STATE token.
ZISA-VAL-reason
is one of the following values, assigned to the ZISA-TKN-OBJ-STATE-REASON
token:
ZISA-VAL-OPERATOR-REQUEST
ZISA-VAL-INVALID-PROCESSNAME
ZISA-VAL-INCORRECT-PROCESSNAME
ZISA-VAL-RESOURCE-PROBLEM
Cause. The cause depends on the reason for the disconnection:
Change Reason
operatorrequest
invalid-processname
incorrect-processname
resource-problem
Cause
The value of tdmNwSaIpxProtoState object for the
IPXPROTO process was deliberately set to disconnected.
A Set operation on tdmNwSaIpxProtoName specified a
syntactically incorrect value.
A Set operation on tdmNwSaIpxProtoName specified a
name for a process that is not an IPXPROTO process.
Resources needed to support communications between the
subagent and the IPXPROTO process are not available.
SNMP Configuration and Management Manual—424777-006
1010: ZISA-EVT-IPXPROTO-UNAVAILABLE
DDL AS Clause
"operatorrequest"
"invalid-processname"
"incorrect-processname"
"resource-problem"
13-69