Rfc Compliance; Udptable Maintenance - HP T9576G06 Management Manual

TCP/IP Subagent
Table 8-13. UDP Group Objects Supported by TCP/IP Subagent (page 2 of 2)
Object and Attributes
udpTable Objects:
udpLocalAddress
1.3.6.1.2.1.7.5.1.1
read-only
IpAddress
udpLocalPort
1.3.6.1.2.1.7.5.1.2
read-only
INTEGER

RFC Compliance

Table 8-14 summarizes compliance of UDP group support with RFC 1213.
Table 8-14. Compliance With UDP Group Definitions in RFC 1213
Object Descriptor
udpInDatagrams
udpNoPorts
udpInErrors
udpOutDatagrams
udpLocalAddress
udpLocalPort

udpTable Maintenance

The TCP/IP Subagent builds the udpTable by sending a STATUS SPI command to the
PROCESS object, using the name of the TCP/IP subsystem being managed
(ztsaTcpIpProcess). It then maps the values found in the ZTCI-DDL-STATUS-
PROTO structure token into the appropriate MIB objects. The ZTCI-DDL-STATUS-
PROTO structure returns connection information for both TCP and UDP. The subagent
ensures that only the UDP connections are selected. Instances of object types that
Definition
Contains entries
describing UDP listener
information.
The local IP address for
the UDP listener.
The local port number of
the UDP listener.
Complianc
e Explanation
Yes See
Partial No corresponding HP instrumentation exists; 0 is
returned.
Yes See
Yes See
Yes See
Yes See
SNMP Configuration and Management Manual—424777-006
Format and Derivation of Value
Refer to
page 8-63 for information on how
entries are created and updated.
The IP address contained in the
ZNET-STATUS-LOC-ADDR field of
the ZTCI-DDL-STATUS-PROTO
structure, returned from a SPI
STATUS command on PROCESS
ztsaTcpIpProcess.
In the case of a UDP listener that is
willing to accept datagrams for any IP
interface associated with the node,
the value is 0.0.0.0.
ZNET-STATUS-LOC-PORT field of
the ZTCI-DDL-STATUS-PROTO
structure, returned from a SPI
STATUS command on PROCESS
ztsaTcpIpProcess.
Table 8-13.
Table 8-13.
Table 8-13.
Table 8-13.
Table 8-13.
8- 63
RFC Compliance
udpTable Maintenance on