Data Definitions - HP T9576G06 Management Manual

TCP/IP Subagent
Table 8-16. TCP/IP Subagent Event Messages (page 3 of 3)
Number ZTSA-EVT-
1023 PIFGETATTR-ERROR
1039 LIFGETATTR-ERROR
1041 PIFGETSTATS-ERROR

Data Definitions

Because they are standard events, most of the tokens, structures, and values
appearing in ZTSA events are defined in the ZSPI and ZEMS data definition files
ZSPIDDL and ZEMSDDL and their associated language-specific files. Data elements
defined by the TCP/IP Subagent are in the file ZTSADDL and associated language-
specific files:
ZTSADDL
ZTSAC
ZTSACOB
ZTSAPAS
ZTSATACL
ZTSATAL
The complete set of SPI definition files is usually located in the ZSPIDEF subvolume of
the NonStop Kernel installation volume. See the SPI Programming Manual for
information on the ZSPI data definitions and data definition files in general. See the
EMS Manual for information on ZEMS data definitions.
Data Definition Language (DDL) definitions from which the
language-specific definitions are derived
Definitions for C programs
Definitions for COBOL programs
Definitions for Pascal programs
Definitions for TACL programs
Definitions for TAL programs
SNMP Configuration and Management Manual—424777-006
Standard Event and Description
Transient Fault
The LM_Get_Attributes_ function returned an
error. The ifTable values derived through the
INFO command are not current until the timer
expires, the same ZLANMSRL function is
retried, and a response obtained.
Transient Fault
The LM_Get_Attributes_ function returned an
error. The ifTable values are not current until
the timer expires, the same ZLANMSRL
function is retried, and a response obtained.
Transient Fault
The LM_Get_Statistics_ function returned an
error. The ifTable values obtained through the
STATS command are not current until the
timer expires, the same ZLANMSRL function
is retried, and a response obtained
8- 67
Data Definitions