Ztsa Mib Objects - HP T9576G06 Management Manual

TCP/IP Subagent
Table 8-3 defines each object in the ztsa subtree.
Table 8-3. Private (ZTSA) MIB Objects Supported by the TCP/IP
Subagent (page 1 of 7)
Object and Attributes
ztsaAgentName
1.3.6.1.4.1.169.3.202.1
read-only
DisplayString
(SIZE (0..31))
ztsaAgentState*
1.3.6.1.4.1.169.3.202.2
read-only
INTEGER
ztsaProcessName
1.3.6.1.4.1.169.3.202.3
read-only
DisplayString
(SIZE (0..49))
ztsaProcessVersion
1.3.6.1.4.1.169.3.202.4
read-only
DisplayString
(SIZE (0..255))
ztsaProgramFile
1.3.6.1.4.1.169.3.202.5
read-only
DisplayString
(SIZE (0..32))
ztsaProcessPriority
1.3.6.1.4.1.169.3.202.6
read-only
INTEGER (0..199)
ztsaProcessGroupID
1.3.6.1.4.1.169.3.202.7
read-only
INTEGER (0..255)
* See State Object/Resource Object Pairs
control or indicate the internal processing state of processes used by the subagent.
Definition
The name of the SNMP
agent process with which
the TCP/IP Subagent is
communicating.
The status of the
interface between the
TCP/IP Subagent and
the SNMP agent.
The fully qualified
NonStop Kernel process
name of this subagent.
The version of the
TCP/IP Subagent
process object file.
The name of the TCP/IP
Subagent program file.
The priority of the
TCP/IP Subagent
process.
The group number of the
user who started the
TCP/IP Subagent.
on page 8-28 for information about TCP/IP Subagent objects that
SNMP Configuration and Management Manual—424777-006
Format and Derivation of Value
\node.$agent-process specified
for the -a startup parameter. If
none specified, $ZSNMP on the
local node.
A value of connected (1) is always
returned in a response message
to a management request,
indicating that the TCP/IP
Subagent is communicating with
the SNMP agent.
\node.$process:seq-no
identifying the process name
specified for the TACL NAME
option when the TCP/IP Subagent
was started, and the sequence
number assigned to the process
by the NonStop Kernel.
T7862Dnn_date --
HP SNMP TCP/IP Subagent,
where Dnn is the product version
of the TCP/IP Subagent; for
example, D20.
\node.$vol.subvol.filename
returned by a Guardian
PROCESS_GETINFO_
procedure call.
Initially determined by the
NonStop Kernel or from a TACL
run option. After startup, the
value can be set by an SNMP
manager.
group-ID-number
by a
PROCESS_GETINFO procedure
call.
8- 21

ZTSA MIB Objects

returned
Guardian