Status Trapdest Command - HP T9576G06 Management Manual

SCF Commands for the SNMP Agent
$agent-process
identifies the NonStop agent process to which the PROFILE object belongs. It
consists of a dollar sign ($) followed by one to five alphanumeric characters,
the first of which must be alphabetic.
#profile-name
identifies the PROFILE object. It consists of a pound sign (#) followed by one
to seven alphanumeric characters, the first of which must be alphabetic.
Considerations: STATUS PROFILE
A returned state of DEFINED or STOPPED means the authentication scheme is
not currently using the entry.
A returned state of STARTED means the entry is part of the current authentication
scheme.
Example: STATUS PROFILE
The following example displays the operational state of the authentication table entries
defined for NonStop agent process $ZSNMP:
12-> STATUS PROFILE $ZSNMP.*
SNMP Status PROFILE
Name
$ZSNMP.#DEFAULT

STATUS TRAPDEST Command

Use the STATUS TRAPDEST command to display the operational state of a trap
destination definition.
STATUS PROFILE [$agent-process.]#trapdest-name
[$agent-process.]#trapdest-name
identifies the trap destination definition whose operational state you want to
display.
$agent-process
identifies the NonStop agent process to which the TRAPDEST object belongs.
It consists of a dollar sign ($) followed by one to five alphanumeric characters,
the first of which must be alphabetic.
State
STARTED
SNMP Configuration and Management Manual—424777-006
5- 31
STATUS TRAPDEST Command