HP T9576G06 Management Manual page 119

Snmp configuration and management manual
Table of Contents

Advertisement

MIBs Supported by the SNMP Agent
Table 3-3. zagInternal Group Objects Supported by SNMP Agent (page 6 of 8)
Object and Attributes
zagInPfState
1.3.6.1.4.1.169.3.155.1.7.3.1.1.3
not-accessible through TCP/IP
read-only access through IPC
interface
INTEGER
zagInPfHostAddr
1.3.6.1.4.1.169.3.155.1.7.3.1.1.4
not-accessible through TCP/IP
read-write access through IPC
interface
DisplayString
zagInPfCommunity
1.3.6.1.4.1.169.3.155.1.7.3.1.1.5
not-accessible through TCP/IP
read-write access through IPC
interface
DisplayString
zagInPfAccess
1.3.6.1.4.1.169.3.155.1.7.3.1.1.6
not-accessible through TCP/IP
read-write access through IPC
interface
INTEGER {readOnly (1),
readWrite (2)}
zagInTrapdest Group Objects:
Definition
The current operational
state of the profile.
The address of the host
sending the message. In
conjunction with the
community name and
access attributes, this
address provides the
authentication attributes
for validating received
messages.
A data string compared
with the agent section of
the community string of
received messages to
authenticate the
message.
The SNMP agent uses
the agent community
string for request
authentication and
passes the entire
community string to
subagents.
The authority of the
community members to
retrieve and alter
network management
information.
Define SNMP manager
Internet addresses and
TCP/IP processes used
by the SNMP agent
when routing traps.
SNMP Configuration and Management Manual—424777-006
3- 17
MIB Objects
Format and Derivation of
Value
Possible states are:
DEFINED (1)
STARTED (3)
STARTING (4)
STOPPED (5)
Default value is DEFINED.
Set by the SNMP agent.
The value is set from SCF
or through authenticated
SNMP requests received
through the IPC interface.
The agent section of the
community string can be 0
to 50 bytes. The default
value is public.
The value can be set from
SCF or through
authenticated SNMP
requests received through
the IPC interface.
The default value is 1 (read-
only). Can be set from SCF
or through authenticated
SNMP requests received
through the IPC interface.

Advertisement

Table of Contents
loading

This manual is also suitable for:

T9576h01

Table of Contents