Scf Command Syntax Summary For The Nonstop Agent; Abort Command - HP T9576G06 Management Manual

A
SCF Command Syntax Summary for
the NonStop Agent
This appendix lists, in alphabetical order, the syntax for the SCF commands supported
by the NonStop agent. It is included as a quick reference for those already familiar with
how the NonStop agent SCF commands function.
In the following syntax diagrams, if you set a default PROCESS with the ASSUME
PROCESS command, you can omit the NonStop agent process name and period, and
just specify #object-name. For example:
-> ASSUME PROCESS $ZSNMP
-> INFO ENDPOINT #END1
-> STATUS ENDPOINT #END1

ABORT Command

The ABORT command causes the specified object configuration to become inactive.
The object is not available for use by the NonStop agent until it is restarted. This is a
sensitive command.
ENDPOINT Object
ABORT ENDPOINT [$agent-process.]#endpoint-name
PROFILE Object
ABORT PROFILE [$agent-process.]#profile-name
TRAPDEST Object
ABORT TRAPDEST [$agent-process.]#trapdest-name
SNMP Configuration and Management Manual—424777-006
A- 1