Trap Multiplexer Subagent/Manager
ztmxProcess Group
This group provides information about the Trap Multiplexer process. It also lets you
change the priority at which the process runs and force a backup process to take over
on demand. The ztmxProcess group consists of a series of scalar objects, identified by
a check mark in the following list:
iso (1)
identified-organization (3)
dod (6)
internet (1)
MIB Objects
Table 12-3
describes each object in the ztmxProcess group.
private (4)
enterprises (1)
tandem (169)
nonstopsystems (3)
ztmx (185)
ztmxProcess (2)
SNMP Configuration and Management Manual—424777-006
ztmxProcCurrTime (1)
ztmxProcVersion (2)
ztmxProcName (3)
ztmxProcPaid (4)
ztmxProcPrimPID (5)
ztmxProcBkupPID (6)
ztmxProcCreatTime (7)
ztmxProcCpuTime (8)
ztmxProcPri (9)
ztmxProcHomeTerm (10)
ztmxProcHeapInitial (11)
ztmxProcHeapCurrent (12)
ztmxProcEmsCollector (13)
ztmxProcAgent (14)
ztmxProcAgentSessionStatus (15)
ztmxProcUdpPort (16)
ztmxProcTcpIpProcess (17)
ztmxSwitchToBackupNow (18)
ztmxProcProgramFileName (19)
ztmxProcEmsWriteTotal (20)
ztmxProcEmsWriteErrors (21)
ztmxProcKeepAliveTimer (22)
12-16
ztmxProcess Group