Set The Date And Time; Set The System Location - Polycom G7500 Administrator's Manual

▪ Country
4. Select Save.

Set the Date and Time

Change the date and time settings in the G7500 system web interface.
Procedure
1. In the system web interface, go to General Settings.
2. Select Date and Time.
3. Configure the following settings (your changes save automatically):
Setting
Date Format
Time Format
Auto Adjust for Daylight Saving Time
Time Zone
Time Server
Primary Time Server Address
Secondary Time Server Address
Current Date and Current Time

Set the System Location

Specify the country and country code where the G7500 system is located.
Procedure
1. In the system web interface, go to General Settings > My Information.
2. Go to Location.
3. Configure the following settings (your changes save automatically):
Polycom, Inc.
Configuring General Settings
Description
Specifies how the date displays.
Specifies how the time displays.
When enabled, the system clock automatically
adjusts for daylight saving time.
Specifies the time difference between GMT and
your location.
Specifies if you want to automatically or manually
configure the system to use a time server. You can
also select Off to manually enter the date and time.
Specifies the address of the primary time server
your system uses when you set Time Server to
Manual.
Specifies the address of the time server your
system uses when the Primary Time Server
Address doesn't respond. This is an optional field.
If you set Time Server to Manual or Auto, the
system doesn't display these settings.
If you set Time Server to Off, you can configure
Current Date and Current Time.
22