Display Ids - Runco WindowWall Installation Manual

Display IDs

LCD displays are identified with a letter and a number, called a display ID. The letter is
set on the front panel of the Quad Input Manager Module (see "Setting the Address
of Each Quad Input Manager Module" on page 45). The number is chosen by the
connector to which the display is connected.
If this display will show local menus, the display ID has a green square around it. The
master (A1) display has a red square around it.
Shows column of
this display in
the video wall
Example of master
display ID when it is
the selected display
Runco WindowWall Installation Guide
Menus and the Remote
Shows which
display a local
menu will be on.
Shows row of
this display in
the video wall
55