Operation; Turning On The Power; Setting The Computer Display Properties - Runco Climate Portfolio CX-70DHD User Manual

1. Turn on your source components.
2. Press the main power switch on the CX-70DHD (see Figure 2-1). The standby/on
indicator lights red.
3. Set the main power switch at the rear of the DHD Controller (see Figure 2-4) to the "on"
position.
4. Press the ON button on the remote control to
turn on the DHD Controller and CX-70DHD (or
press the power button on the front of the DHD
Controller). The power indicator on the DHD
Controller lights solid blue.
5. After a brief warm-up period, the CX-70DHD
will display an image.
To maximize image quality when using the CX-70DHD with a personal computer, you may
need to adjust the display properties of your computer's video card. To do this on a
Microsoft® Windows®-based PC:
1. Choose Settings from the Windows Start
Menu and click on "Control Panel."
CX-70DHD Installation/Operation Manual 31

4. Operation

4.1

Turning on the Power

4.2
Setting the Computer
Display Properties