Runco WindowWall Installation Manual page 96

Spreading Images Across the Wall
Wall Width and Wall Height
These show the number of displays wide and high for the picture. This may be
different from the physical size of the wall. You could build a 4 x 3 array of displays
and use
corner, for instance. Using the
menu will set these automatically.
Unit Column and Unit Row
These represent the position of the display in this "array. " For example, in the 4 x 3
array of displays shown below, Unit numbering starts at the top left corner of the
array. This display would have a Unit Column value of 1 and a Unit Row value of 1.
Using the
automatically.
Unit Column 1
Unit Column 1
Unit Column 1
Unit Column 1
Wall Mode
When checked, this turns on the Runco's Big Picture
the display shows the whole picture. Using the
CONFIGURATION
82
to put a single picture on the four displays in the upper left
WALL MODE
QUICK CONFIGURE
Unit Row 1 Unit Row 1
Unit Column 2
Unit Row 2 Unit Row 2
Unit Column 2
Unit Row 3 Unit Row 3
Unit Column 2
Unit Row 4 Unit Row 4
Unit Column 2
menu will set these automatically.
Runco WindowWall Installation Guide
line on the
QUICK CONFIGURE
line on the
WALL CONFIGURATION
Unit Row 1
Unit Column 3
Unit Row 2
Unit Column 3
Unit Row 3
Unit Column 3
Unit Row 4
Unit Column 3
QUICK CONFIGURE
WALL CONFIGURATION
menu will set these
Unit Row 1
Unit Column 4
Unit Row 2
Unit Column 4
Unit Row 3
Unit Column 4
Unit Row 4
Unit Column 4
feature. When not checked,
TM
line on the
WALL