Table of Contents
Advertisement
Wall Installation
Before you start building your wall, keep the following points in mind:
Wall Installation Options
There are three main types of Runco WindowWall installations:
• A structure that is plumb and flat will greatly reduce issues with mounting and
alignment of the Runco WindowWall system.
• Brackets are to be installed first - do not remove LCDs from their boxes until the
entire wall of brackets is installed, level and plumb.
• For each row of brackets, build from the center outwards.
• After each row of brackets is built, check it for level and plumb.
• All brackets in a row should be level with the bracket next to it within ±0.1°.
Each bracket should be square with the level surface by ±0.05°. Bracket wall
planarity should not exceed ±0.5mm.
• For optimal product performance, maintain components within temperature
specifications. Occasional temperatures out of specification are acceptable for a
short period of time.
• Standard installation - mounted to a wall
• Column floor stand - maximum of three high without additional support
• 2 x 2 free-standing mount
Runco WindowWall Installation Guide
23
Advertisement
Table of Contents
