Changing The Osd Language; Setting The Pc Display Properties - Runco FlPL-50XA Owner's Operating Manual

Operation
4.2
Changing the OSD
Language
4.3
Setting the PC Display
Properties
The PlasmaWall OSD language is initially set to English, but can also display the menus in
French (Français), Spanish (Español) or German (Deutsch). To change the OSD language:
1. Press MENU and enter the Service menu passcode.
2. Press MENU again and select Service from the Main Menu.
3. Select Language from the Service Menu.
4. Press or to highlight the desired language and press ENTER. The change takes
effect immediately.
You must enter a passcode to access the Service menu.
Note
To maximize image quality when using the PlasmaWall with a personal computer, you
may need to adjust the display properties of your PC video card. To do this:
1. Choose Settings from the Windows Start
menu and click on "Control Panel."
2. Double click on the Display icon.
3. Click the Settings tab on the display dialog
box.
4. Adjust the resolution to 1024x768 pixels.
30 Runco PlasmaWall Owner's Operating Manual