Table of Contents
Advertisement
Configuration Scenarios
Scenario 5: Two Sub Walls Per Quad Input Manager Module
This scenario uses an external video processor, but saves on the number of outputs
required for that processor. Each output of the processor drives two LCDs. The
processor outputs can be a higher resolution than the native 1366 x 768 resolution of
the tile, thus allowing for better use of the available pixels.
Note:
Module.
Cabling
Cable the LCDs so each pair of LCDs that you will use for a sub wall are adjacent to
each other. These can be 1 x 2 or 2 x 1 rectangles; the position sensors will be used to
determine how they are arranged. Cable the outputs of the video Digital 1 and
Digital 3. The source on Digital 1 will be spread over LCD 1 and LCD 2. The source on
Digital 3 will be spread over LCD 3 and LCD 4. It is not necessary to cable the Loop
Out connector of the Quad Input Manager Module.
112
4 x 4 Runco WindowWall with two high resolution sources per Quad Input Manager
Runco WindowWall Installation Guide
Advertisement
Table of Contents
