Table of Contents
Advertisement
Adjusting Color Balance
15
Tips for Color Balancing
64
When all displays match in gray, highlight the
press
Press
.
ENTER
MENU
•
COPY TO CLIPBOARD
You can then make more adjustments to see if it gets better or worse.
will restore these saved settings. The clipboard is only for
FROM CLIPBOARD
testing. These values are not saved when AC power is off.
• Color balance values are saved for all input sources in the same memory
location.
• Stand back from the array and directly in front of it to get an overall view.
• Small changes are difficult to see at first, particularly with white. When you
don't know which color to change, pick one at random and change it 4 or 5
steps. The result will be either better or worse. If worse, go the other way with
that color. If that is also worse, put this color back where you started and do the
same with another color. If everything you do makes the match worse, you
must be close to the ideal point.
• Removing red has the same effect on hue as increasing blue and green
together. The
COLOR BALANCE
to tell you what the effect will be of moving a color toward that end.
• Changes in the white values affect the gray values but changes in gray values
do not affect the white values.
Runco WindowWall Installation Guide
to close all the menus.
will save all the current settings to a temporary memory.
menu slider bars have colored bulbs at each end
REMOVE TEST PATTERN
line and
RECALL
Advertisement
Table of Contents
