RS232 Communication
Connecting RS232 Cables
1
2
For more information about configuring RS232 communications, see "Serial Port
Settings and Diagnostics" on page 89.
RS232 port connection is on the Quad Input
Manager Module. Only connect to Quad module A.
Otherwise, the connection won't work.
58
Connect the 9-pin adapter to the serial output connector of the controlling
computer. (This computer does not have to be the same one as the computer
used as a picture source.) The serial output is sometimes called the Comm Port,
and sometimes there is more than one.
Connect a cable from the RJ-45 adapter to the In connector of the Quad Input
Manager Module A.
Runco WindowWall Installation Guide