Selecting An Input Source; Viewing Input Signal Information; Setting The Computer Display Properties - Runco CinemaWall SP-42xa Owner's Operating Manual

Operation
4.3
Selecting an Input
Source
4.4
Viewing Input Signal
Information
4.5
Setting the Computer
Display Properties
To select an input source, press a numbered button
on the remote control corresponding to that input.
Press INFO on the remote control to have the
CinemaWall display the currently-selected input, signal
timing information (frequency and polarity) and aspect
ratio. This information stays on-screen for about five
seconds.
To maximize image quality when using the CinemaWall with a personal computer, you
may need to adjust the display properties of your computer's video card. To do this on a
Microsoft® Windows®-based PC:
1. Choose Settings from the Windows Start
Menu and click on "Control Panel."
2. Double click on the Display icon.
3. Click the Settings tab on the display dialog
box.
4. Adjust the resolution to 1024x768 pixels.
28 Runco CinemaWall SP Series Owner's Operating Manual
RGB-HD DVI-D INFO
1 2
S / V COMP DVI VIDEO
3 4 5
INPUT SELECTION
INPUT1
F H : 3 1 . 5 k H z
F V : 6 0 . 0 H z
6 4 0 4 8 0
X
POL.H : NEGA
POL.V : POSI
PIX BY PIX