Configuration Scenarios
Wall Settings
Big Picture is not used in this scenario, so
PICTURE SETUP
you.
Scenario 2: Runco Big Picture
When in Runco Big Picture, one source is spread over the entire wall. In the Runco
WindowWall product, any input can easily be used as the source for big picture.
A1
Quick Configure Big Picture
B3
B1
C1
Note:
104
menu for all displays. The Quick Configure setting takes care of this for
Digital 1
Source 1
Digital 1
Source 4
Digital 1
Digital 2
Source 7
3 x 3 wall using Runco Big Picture. Any input can be spread over the whole wall.
Runco WindowWall Installation Guide
WALL MODE
A2
B2
C2
Dual Link In
A
Loop Out
Digital 2
Digital 3 Digital 4
Source 2
Source 3
Dual Link In
B
Loop Out
Digital 2
Digital 3 Digital 4
Source 5
Source 6
Dual Link In
C
Loop Out
Digital 3 Digital 4
Source 8
Source 9
should be set to off on the
A3
B3
C3
BIG