System Architecture - Runco WindowWall Installation Manual

System Architecture

The Runco WindowWall has three main electronic components: the LCD tile, power
supply module and the Quad Input Manager Module. The LCD tile has a removable
interface board, which connects to the off-board power supply and Quad Input
Manager Modules. Using external modules produces less heat and allows for
reduced and/or easier service of the LCD tile itself.
LCD tile - front view
Some basic points to keep in mind:
Power supply module
• Each Quad Input Manager Module controls up to four LCDs
• Modules are linked together by RS485 cables
• The first processor in the A Quad Input Manager Module (A1) is the master
processor
• The master processor takes in the input from the remote and/or the host RS232
• The DHD3 is an integral part of the configuration and can be attached to a
Quad Input Manager Module for Runco's highest quality video input
management, scaling, and processing
Runco WindowWall Installation Guide
Removable
interface
board
Equipment rack (optional)
Quad Input Manager Module
System Architecture
LCD tile - rear view
DHD3
7