Table of Contents
Advertisement
Mounting Brackets to a Wall
5
6
7
Note:
mount points as necessary.
8
9
10
28
Using a level (a digital one is highly recommended), level the bracket as you keep
in mind the string at the bottom.
Align the v-shaped notch on the LCD mount with the desired center of the LCD
(this is done for the first bracket only).
Tighten the screws as necessary.
Be sure that as you tighten the screws, the wall is flat. If it is not, use shims near the
Attach horizontal brackets to the LCD mount that will attach to the next LCD
mount you want to install.
Repeat steps
-
for the first row. Be sure to level all brackets with respect to the
4
8
first mounted bracket.
Using a digital level, make sure the first row is level. All brackets in a row should
be level with the bracket next to it within ±0.1°.
Runco WindowWall Installation Guide
Advertisement
Table of Contents
