Connecting The Plasma Display - Runco CinemaWall CW-43MC Owner's Operating Manual

CONNECTING THE PLASMA DISPLAY

Modular Controller Card - Input Connections
Plasma Rear View
DVI Component S-Video Composite
Push Button
INPUT 5
DVI-I SOURCE INPUT (WITH HDCP DECRYPTION):
(Digital 480 Progressive): Input for set top box or PC
with DVI digital output.
INPUT 4
COMPONENT INPUT:
Component video is the best type of signal that can be used. The most common sources
that use component outputs are DVD players, and it is highly recommended that component be used when
possible. Component video goes one step beyond S-Video in picture quality; chroma (color) information is more
resolved and the overall picture appears more well-defined.
INPUT 3
S-VIDEO INPUT:
S-Video is the second-best type of signal that can be used, but is MUCH better than Com-
posite video. Using such sources as Satellite receivers, high-quality VCRs and DVD players (with no component
output) will produce a MUCH cleaner and sharper signal.
S-VIDEO/COMPOSITE SELECTION PUSH BUTTON:
This push button toggles between S-Video and
Composite Video when using Input 3. Both S-Video and Composite Video cannot be active simultaneously.
COMPOSITE VIDEO INPUT:
Composite video is the most common type of signal used, but is also the lowest
in picture quality. Many sources have outputs that are limited to composite video, such as some VCR's and cam-
corders; others such as Laser Disc players actually produce slightly better results when using composite video.
10