Aspect Ratio Settings
Justify Settings
Justify determines how the picture will be placed in a wall of displays. For a single
display, Justify determines placement on the screen. For a wall of displays, if the
image is not large enough to fill all the displays in the wall, some will be left blank.
Top/Left
Positions the image starting with the top, leftmost display, then across and down.
Center
Positions the image starting with the center of the image in the center of the wall
spreading out equally to all displays.
Bottom/Right
Positions the image starting with the bottom, rightmost display, then across and up.
Overscan
This is used to hide blank areas and stray lines in the edges of an image. The lower
the overscan setting, the more of the optical image that is seen. Standard CRT
televisions have an overscan of about 5%, which may actually hide content or images
that you want to see.
Sharpness
Sharpness settings determine how crisp the image should be. There are sixteen
levels of sharpness, where 0 is the softest and 15 is the sharpest. Seven is the default.
76
Runco WindowWall Installation Guide