Audio Dubbing - Sony DVCAM DSR-200P Operating Instructions Manual

Audio dubbing

If you recorded in Fs 32k (12 bit) recording mode, you can add stereo narration or music
to the recording.
Making connections
To use additional audio line in [a]
Connect the LINE OUT jacks of an audio source to the rear AUDIO IN jacks of the
digital camcorder using an audio connecting cord with the XLR connector (not
supplied) and then set LINE/MIC to LINE.
To use an additional microphone
• Use the built-in microphone [b] or connect an external microphone (not supplied)
to the MIC (PLUG IN POWER) jack, then set LINE/MIC to MIC FRONT.
• Use an external microphone (not supplied) with the XLR connector
rear AUDIO IN jack of the digital camcorder, then set LINE/MIC to MIC REAR.
Audio source
[a]
: Signal flow
76
[c]
[d]
[c]
[d], connect the
[b]
DSR-200P CE 3-858-622-12(1). E