Table of Contents
Advertisement
Setting Up Your Printer
When setting up a printer to print with LPR, you can add both a
printer located in the same segment and one located beyond a
router.
Note:
Be sure that the computer is connected to the network and TCP/IP
is correctly set.
The valid IP address other than default value "192.168.192.168"
must be set; otherwise the printer does not appear under the
Epson_lpr group icon. See Chapter 2 or 3 to set the IP address.
The EPSON Status Monitor 2 utility shipped with the interface card
models C82362 /C82363 /C82364 with software version 1.x
and EPL-N2700/N4000 printers enables EPSON TCP/IP printers.
These EPSON TCP/IP printers can coexist with lpr printers added
by EpsonNet Direct Print.
The job control functions such as Cancel Printing and Purge
Print Jobs are available when you double-click the target printer
icon in the Printers folder. However, if the printer has already
started printing a document, the print job may not be cancelled
completely.
EpsonNet Direct Print Utility
11
11-3
Advertisement
Table of Contents
