Printing with NetBEUI
To setup a printer connected with a interface card:
1. Be sure that IBM OS/2 NetBIOS is installed on your computer.
2. To create a printer, double-click the target printer icon to open
the Properties dialog box. Then click the Output Port tab.
3. Select the port.
4. Connect to the printer from the command line.
Example: Connect the printer to LPT1.
net use LPT1: \\ the NetBIOS name of the interface card \the
Device name of the interface card
Note:
To change the NetBIOS name and device name, use EpsonNet
WinAssist or WebAssist running on Windows Me/98/95/2000/NT.
Settings for OS/2
8
8-5