Table of Contents
Advertisement
8. Press Esc.
9. Select Queues Serviced by Printer from the Print Server
Configuration menu and press Enter.
10. Select the printer that you want to use from the Defined
Printers list and press Enter.
11. Press the Insert key and assign a queue to the print server port
from the Available Queues list.
12. Specify a priority level between 1 to 10. One is top priority.
13. Press Esc to exit PCONSOLE.
Now go to the section "Configuring for NetWare using EpsonNet
WinAssist" on page 4-30.
Making the printer environment with Bindery mode
Follow the steps below to make the printer environment under
NetWare 4.1x and Intranet Ware with Bindery emulation.
Note:
Assign Trusteeships for users if necessary.
Be sure to use PCONSOLE to set the print queue and print server
instead of using NWAdmin.
4-22
Settings for NetWare
Advertisement
Table of Contents
