Chapter 3 Setting The Ip Address - Epson EpsonNet C82391 Series Administrator's Manual

Chapter 3
Setting the IP Address
To use the interface card with TCP/IP, you need to assign it an IP
address using EpsonNet WinAssist, EpsonNet MacAssist, or the
arp/ping commands.
The IP address must be set in the following cases:
When configuring the interface card using EpsonNet
WebAssist (the utility pre-installed on the interface card)
When using remote (LPR on IP) printing from NetWare 5.x
When using TCP/IP (via EpsonNet Direct Print) printing
from Windows Me/98/95/2000/NT 4.0
When using TCP/IP (LPR port) printing from
Windows 2000/NT 4.0/NT 3.51
When using TCP/IP (lpr port) printing from OS/2 Warp or
UNIX
When using Internet Printing with EpsonNet Internet Print
from Windows 98/95/NT 4.0
When using Internet Printing from Windows Me/2000
When managing printers using EpsonNet WebManager via
TCP/IP
Setting the IP Address
3
3-1