Setting Up For Hp-Ux 9.05 Or Later - Epson EpsonNet C82391 Series Administrator's Manual

Epsonnet 10/100 base tx int. print server 2
Table of Contents

Advertisement

Setting up for HP-UX 9.05 or later

In the following steps, substitute the name that your printer with
the interface card will be known by for HOSTNAME, and the
name by which you want your printer to be known for Rprinter.
1. Add the IP address and host name to the /etc/hosts file.
For example:
22.33.44.55 HOSTNAME
2. Terminate the printer service.
For example:
lpshut
3. Create a printer.
For example:
lpadmin -pRPrinter -v/dev/null -mrmodel
-ormHOSTNAME -orpaux
4. Restart the print service.
For example:
lpshed
5. Enable the printer for use.
For example:
accept Rprinter
enable Rprinter
6. To print, use the lp command.
For example:
lp -DRPrinter Print-File-Name
9-6
Settings for UNIX

Advertisement

Table of Contents
loading

Table of Contents