4. The IP Address Configuration and the AppleTalk
Configuration dialog box appears.
Note:
See "Setting the IP Address Using EpsonNet WinAssist/
MacAssist" on page 3-2 for more information about setting the IP
address.
5. Set the following options in the AppleTalk Configuration box.
Printer Name:
Enter the printer name (up to 32 characters). The default name
is shown below.
Level 1 printer: Epson-xxxxxx
Level 2 or 3 printer: Printer product name-xxxxxx
(xxxxxx is a substitute for the last 6 digits of the MAC
address)
Entity Type:
Displays the printer's entity type. Do not change the entity
type unless "epson" is displayed. If "epson" is displayed, you
need to enter the entity type to match the driver for the printer.
Settings for Macintosh
7
7-3