Epson EpsonNet C82391 Series Administrator's Manual page 56

9. Enter your password (up to 20 characters) and click OK to
save the settings. If you are entering a password for the first
time, click Change and set the password. For more
information about passwords, see "About passwords" on
page 10-7.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting Refresh from the View
menu.
c
Note:
Printer Objects (named PR0) are automatically created when you
save the settings using EpsonNet WinAssist. Use PCONSOLE or
NWAdmin to change the printer name.
4-10
Settings for NetWare
Caution:
Since it takes 2 or 3 minutes to send new settings to the
interface card, you must wait until the on-screen message
appears before turning off your printer.