Configuring For Netware Using Epsonnet Winassist - Epson EpsonNet C82391 Series Administrator's Manual

Configuring for NetWare using EpsonNet WinAssist

Configure the interface card using EpsonNet WinAssist.
1. Turn on the printer with the interface card.
2. From any NetWare client, log in to the target NetWare server
with supervisor privileges or as an ADMIN.
3. Load the print server from the file server's system console
which the print queue volume is set.
>LOAD PSERVER print server name you set using
PCONSOLE or NWAdmin
4. Run EpsonNet WinAssist from the Start menu.
4-30
Settings for NetWare