Selecting A Printer To Monitor - Epson EpsonNet C82391 Series Administrator's Manual

8. Select Allow monitoring to monitor Windows shared
printers. Select Do not allow monitoring to not monitor
Windows shared printers. Click Next.
Note for Win 98/95:
The screen shown below does not appear in Windows 98/95.
9. Check the current settings and click Next. The installation
program will start installing the necessary files. Follow the
on-screen instructions.
10. When the Setup Complete dialog appears, select Yes and click
Finish to restart Windows.

Selecting a Printer to Monitor

Before monitoring a LPR printer with EPSON Status Monitor 2,
you need to select the printer in your operating system. Follow
the steps for your operating system: Windows Me/98/95,
"Setting Up Your Printer" on page 11-3; Windows 2000, "Printing
via Standard TCP/IP Port Monitor in Windows 2000" on page
6-2; NT 4.0, "Printing via LPR port in Windows NT 4.0" on page
6-5; and NT 3.51, "Printing via LPR port in Windows NT 3.51" on
page 6-6.
Note:
The interface card's IP address must be set; otherwise the printer will
not appear on the screen. For instructions on setting the IP address for
the interface card, see Chapter 3, "Setting the IP Address."
12-10
EPSON Status Monitor 2 (Windows only)