Initializing The Interface Card - Epson EpsonNet C82391 Series Administrator's Manual

Initializing the Interface Card

You must initialize the interface card in the following cases:
The first time you turn on the printer after installing the
interface card
When the utility does not recognize the interface card because
of settings conflicts on the network
If you forget the configuration utility's password
Follow these steps to initialize the interface card.
1. Make sure that the printer with the interface card is turned off.
2. While holding down the status sheet button, turn the printer
on.
3. Hold down the status sheet button for about twenty seconds
until the red status light and green data light turn on. These
lights indicate that the interface card is being initialized.
4. After initialization is complete, press the status sheet button
to print a status sheet. Check the information on the status
sheet.
1-6
Getting Started