Printing With Ipp (Windows 2000 Only); Configuring For Ipp Using Epsonnet Winassist - Epson EpsonNet C82391 Series Administrator's Manual

Printing with IPP (Windows 2000 Only)

This section explains about printing with Internet Printing
Protocol (IPP) in Windows 2000. First, you need to set the IPP URL
of the printer using EpsonNet WinAssist or WebAssist. Then set
up the printer with the Add Printer Wizard.

Configuring for IPP using EpsonNet WinAssist

1. Turn on the printer with the interface card.
2. Run EpsonNet WinAssist from the Start menu.
3. Select the printer you want to configure from the list, then
click Configuration or double-click the printer.
Note:
If you have connected more than one printer to the network, you
can distinguish between the printers by the MAC address on a
status sheet.
If the IP address is set to the default IP address, the printer model
may not appear.
You can search printers in other segments by setting the Search
Options in the Tool menu in EpsonNet WinAssist.
See"Optional settings" on page 10-4 for more information.
6-18
Settings for Windows 2000/NT