Epson EpsonNet C82391 Series Administrator's Manual page 276

NetWare printers cannot be monitored when Allow monitoring
is selected for monitoring Windows shared printers under
Windows NT 4.0/3.51.
Cause
EPSON Status Monitor 2 is
set incorrectly.
NetWare printers cannot be monitored.
Cause
You are using EpsonNet
WinAssist.
The printer port number is
not set to 0 when using
Remote Printer mode.
15-10
Troubleshooting
What to do
Double-click Services in the Control
Panel and stop the EPSON Printer
Status Agent service. Restart EPSON
Status Monitor 2 and then restart the
service. This procedure must be
repeated every time you log on to
Windows NT 4.0/3.51.
What to do
You cannot use EPSON Status
Monitor 2 and EpsonNet WinAssist at
the same time. Quit WinAssist and use
EPSON Status Monitor 2. If you want
to use WinAssist, quit EPSON Status
Monitor 2 first.
Use the NetWare control tool to set the
port number to 0.