TCP/IP
Items
Get IP Address
IP Address
Subnet Mask
Default Gateway
Use a private IP address
when an IP address cannot
be assigned by the DHCP
server
Set by PING
Universal Plug and Play
Universal Plug and Play
Device Name
SUBMIT button
10-26
The EpsonNet Configuration Utility
Explanations
Select a method for acquiring IP addresses. If
Auto is selected, DHCP becomes available. To
use the DHCP server, it must be installed in your
computer and must be correctly configured.
See your operating system's online help for
detailed instructions.
To set the IP address manually, select Manual.
Enter an IP address for the interface card if set
to Manual. Be sure to give an IP address which
does not conflict with any other device on the
network.
Set the subnet mask.
Set the gateway address if needed.
Select Enable to acquire the private address
between 169.254.1.1 and 169.254.254.254
automatically when an IP address cannot be
acquired by the DHCP server.
Enables or disables IP address setting using the
ping command.
Enables or disables Universal Plug and Play.
Enter the device name (up to 63 characters).
The first character of the device name must be
an alphabet.
Saves any changes.