Setting Up For Sunsoft Solaris 2.4 Or Later - Epson EpsonNet C82391 Series Administrator's Manual

Setting up for SunSoft Solaris 2.4 or later

In the following steps, substitute the name that your printer with
the interface card will be known by for HOSTNAME, and the
name by which you want your printer to be known for Rprinter.
1. Add the IP address and printer host name to the \etc\hosts
file.
For example:
22.33.44.55 HOSTNAME
2. Define the host name as a print server.
For example:
lpsystem -t bsd HOSTNAME
3. Create the printer.
For example:
lpadmin -p Rprinter -s HOSTNAME\aux-T unknown-1
any
4. Enable the printer for use.
For example:
accept Rprinter
enable Rprinter
5. To print, use the lp command.
For example:
lp -d RPrinter Print-File-Name
Settings for UNIX
9
9-3