Printing With Netbeui; Configuring For Netbeui Using Epsonnet Winassist - Epson EpsonNet C82391 Series Administrator's Manual

Epsonnet 10/100 base tx int. print server 2
Table of Contents

Advertisement

Printing with NetBEUI

This section explains how to configure the interface card for
NetBEUI using EpsonNet WinAssist or WebAssist.
Note:
Be sure that the NetBEUI protocol and Client for Microsoft Networks
are installed in your computer. See "Installing the NetBEUI Protocol"
on page A-10 for instructions.

Configuring for NetBEUI using EpsonNet WinAssist

You can use the interface card with the default settings for
NetBEUI. If you want to change the default settings, use
EpsonNet WinAssist or WebAssist. The default values for
NetBEUI are as follows;
Items
NetBIOS name
Workgroup name
Device name
To configure the interface card for NetBEUI, follow the steps
below.
Note:
TCP/IP, NetBEUI, or IPX must be installed on your computer.
1. Turn on the printer with the interface card.
2. Run EpsonNet WinAssist from the Start menu.
Default values
EPxxxxxx
WORKGROUP
EPSON
Settings for Windows Me/98/95
5
5-3

Advertisement

Table of Contents
loading

Table of Contents