Table of Contents
Advertisement
3. Select Install EpsonNet Direct Print, and then click
4. Follow the on-screen instructions to complete the installation.
5. Restart the computer after installation is complete.
Your computer is now set up to print with LPR via EpsonNet
Direct Print. See the next section to set up your printer.
Setting Up Your Printer Using EpsonNet Direct
Print
When setting up a printer to print with LPR, you can add both a
printer located in the same segment and one located beyond a
router.
Note:
Be sure that the computer is connected to the network and TCP/IP
is correctly set.
The valid IP address must be set; otherwise the printer does not
appear under the Epson_lpr group icon.
The EPSON Status Monitor 2 utility shipped with the interface card
models C82362 /C82363 /C82364 with software version 1.x
and EPL-N2700/N4000 printers enables EPSON TCP/IP printers.
These EPSON TCP/IP printers can coexist with lpr printers added
by EpsonNet Direct Print.
The job control functions such as Cancel Printing and Purge
Print Jobs are available when you double-click the target printer
icon in the Printers folder. However, if the printer has already
started printing a document, the print job may not be cancelled
completely.
EpsonNet Direct Print
.
8
8
8
8
8
8
8
8
8
8
8
8
175
Advertisement
Table of Contents
